Remodelaholic | DIY Craftsman Window Trim

This simple craftsman style window trim needs NO confusing angled cuts, so it’s simple for…

This simple craftsman style window trim needs NO confusing angled cuts, so it’s simple for anybody to do, even a beginner, and it can make a Large influence. 

Really do not cease at window trim, make your own curtain rods, include window containers outside the house, and even some wooden shutters outside the house!

DIY Easy Craftsman Trim helps windows to look finished featured on Remodelaholic.com

Hi, close friends!  It’s Lauren from Bless’er Dwelling, and I’m thrilled to be again sharing additional Do-it-yourself goodness from our most current dwelling shenanigans.

If you’ve never ever frequented my tiny corner of the web, my spouse and I are on a mission to bring a lot of character and allure to our really primary builder box dwelling.

This time two a long time ago, our dwelling area seemed like this:

Before updating craftsman window trim and adding a fireplace Blesser House for Remodelaholic.com

Because embarking on our residence possessing journey, we have learned that the top rated a few means to completely transform a area in a substantial way is with paint, very long curtains, and architectural facts.

DIY Easy Craftsman Window Trim updated in living room by blesser house featured on remodelaholic.com

We currently tackled the paint and curtains portion very last 12 months, and when we threw our Do-it-yourself fake hearth into the combine, the area all of a sudden seemed 10 periods even larger!  But a single thing it was lacking in the character office- window trim.

So we made a decision it was time to fix that.

Before of the window getting DIY Easy Craftsman Trim featured on Remodelaholic.com

Video clip Tutorial

Begin listed here and view how this challenge came collectively, then arrive again for additional of a stage by stage craftsman window trim system.

Just can’t see the online video? Get it on our YouTube channel listed here (and subscribe although you are there 😉

Provides Checklist

(The down below provides are what you will require for a single standard 35.5″ x 59.5″ window.)

  • 1″x2″x8′ board
  • two- 1″x4″x8′ boards
  • 1″×6″x8′ board
  • two-in brad nails
  • Wood screws
  • Blend sq. resource
  • Pencil
  • Hammer or nail gun
  • Drill
  • White trim caulk
  • Wood filler
  • Fantastic grit sandpaper
  • Paint (I used Sherwin Williams Pure White to match our hearth and baseboards.)
  • Jigsaw
  • Round noticed or table noticed

We had 5 home windows to include trim to, so we had rather a bit additional wooden than what is in that record.  The best portion nevertheless is this requires very elementary carpentry techniques, so this is an exceptional challenge if you are a beginner at residence advancement.  No complicated angled cuts!

Tutorial and Guidelines

Get this craftsman window trim glimpse in your own residence with these tips, tricks, and instructions.

one – We started out by making the header to start with and calculated the top rated width of our window then additional 10 inches to that measurement to allow for for a five inch overhang on each facet of the window.

We marked that measurement on a 1″x6″ board employing the sq. resource to mark a straight line.

DIY Easy Craftsman Trim How to Steps featured on Remodelaholic.com

Then, employing our round noticed, we slash the 1″x6″ board.

Sawing DIY Easy Craftsman Trim How to Steps featured on Remodelaholic.com

We applied the similar measurement from our 1″x6″ to mark and slash two items of 1″x2″ boards.  Since we had three windows clustered collectively to make a single huge window, we worked from a 12 foot length board.

After the 1″x2″s were slash, we connected them to each facet of the 1″x6″ board with wooden screws (as revealed down below).

DIY Easy Craftsman Trim How to Steps how to featured on Remodelaholic.com

Our header had to be really very long for our huge window, and because we couldn’t discover 1″x2″x12′ boards, we had to slash and connect our 1″x2″s in 6 items to the extended 1″x6″x12′ board.

How to update window trim in an easy way featured on Remodelaholic.com

Then we had our header!

How to create the header for the DIY Easy Craftsman Trim featured on Remodelaholic.com

After we centered our new header about the home windows, we nailed them into spot.  We applied a very good ol’ fashioned hammer because the dimensions of our nails would not do the job in our nail gun.

How to install a header on the DIY Craftsman Trim featured on Remodelaholic.com

two – Up coming segment was the window sill.  We worked on this larger sized window in thirds far too.  Your overall window sill really should be the similar length as your header was.

We marked the width we necessary for the sill on one more 1″x6″ board and slash employing our round noticed.

Then, employing the recently slash 1″x6 “board, we marked on the wall wherever the sill really should stop (five inch overhang) and held up the board to mark the window’s edge.

Step by step of the DIY craftsman window trim at Remodelaholic.com

We calculated the window’s depth far too.

Measuring to cut perfectly for DIY window trim featured on Remodelaholic.com

We marked these two measurements (the window’s width and depth) on the 1″x6″ board.

How to measure and cut window trim featured on Remodelaholic.com Learn how to create window trim with this beginner tutorial featured on Remodelaholic.com

Working with our sq. resource yet again, we marked the straight lines among the measurements.

Beginner building project craftsman window trim featured on Remodelaholic.com

Drawing out the perfect cut for window trim featured on Remodelaholic.com

Then slash it out with a jigsaw.

Cutting window trim with a jigsaw featured on Remodelaholic.com

Soon after our cuts, here’s what our 1″x6″ board seemed like.

Quick and simple window trim step by step featured on Remodelaholic.com

We fit our recently slash 1″x6″ board into spot and nailed it in to sort our window sill.

Nailing on window trim tutorial featured on Remodelaholic.com

three – To make the sides of the window, we applied 1″x4″ boards.

We just calculated the peak among the base of the header (from stage one) and the top rated of the sill (from stage two) to know at what length to slash the 1″x4″ board.

In functioning with our huge window, the two sections in the center of our a few home windows were a tiny broader than a 1″x4″ board at 4.74″.  So we had to cut two 1″x6″ boards lengthwise to make them the exact width we necessary.

We lined the sides up on the edge of the home windows and nailed them into spot.

Adding DIY window trim for a craftsman look featured on Remodelaholic.com

4 –  For the very last carpentry stage, we additional our apron (the wooden piece beneath the window sill).

We calculated the width from the outside the house edge of the 1″x4″ facet piece to the other outside the house edge of the 1″x4″ facet piece to discover how very long to slash the 1″x4″ board for the apron.

Adding the apron of the craftsman window trim featured on Remodelaholic.com

If you are a visible human being, this could enable to present you how we crafted the trim for our larger sized window.

Visual of supplies used to create craftsman window trim featured on Remodelaholic.com

five – Then caulk like crazy!  Also regarded as a carpenter’s best good friend.

Go through tips for a ideal caulking occupation listed here and additional tips (such as a online video) listed here. 

Caulk all of the seams and fill the nail holes and knots with wooden filler.  Let dry and sand until finally easy.

Caulking after installing DIY window trim featured on Remodelaholic.com

six –  Finally, paint all of your new trim.  We did two coats of primer+paint in a single.

Painted and finished after of DIY craftsman window trim featured on Remodelaholic.com

Soon after we place our curtains again up, I was impressed at the difference it created!  It’s like our home windows were destined for Craftsman window trim all alongside.

Our home windows glimpse stunning with our hearth far too.  Very before long, we’ll be placing an place rug in listed here to make this area concluded.  And I hope to place beams on our ceiling ultimately, but I could be pushing my luck there.

Beautiful living room featuring DIY craftsman window trim by Blesser House featured on Remodelaholic

You can see additional sources and DIYs from this area about on Bless’er Dwelling.

Gorgeous DIY craftsman window trim tutorial featured on Remodelaholic.com

What do you assume?  Something you could endeavor?  Trimming out home windows seriously is a significant area changer.  I can not hold out to tackle the relaxation of our upstairs home windows with it.

Be positive to pin this article for afterwards:

No confusing cuts, just a beautiful tutorial. DIY Easy Craftsman Window Trim Tutorial by Blesser House featured on Remodelaholic.com

DIY tutorial for installing the easiest DIY window trim. This craftsman style trim requires NO confusing angled cuts, so it's easy for anyone to do, even a beginner featured on Remodelaholic.com

A lot more tips and concepts for Do-it-yourself window trim work:

Begin Caulking! Tips and Methods, How to Incorporate Trim to Arched Home windows, A lot more top rated tricks and tutorials for trimming home windows: plus additional tips and tricks for setting up trim and molding.

Initially posted one.23.2016 // Updated two.26.2020

Remodelaholic is a participant in the Amazon Providers LLC Associates Program, an affiliate marketing program created to give a usually means for web sites to get paid marketing costs by marketing and linking to amazon.com. Be sure to see our total disclosure listed here.

About Lauren