Do you want to update the seem of the ceiling in a place in your household? See how I up-to-date our basement ceiling with a whitewashed knotty pine wood plank board. I will choose you through the Diy wood plank ceiling method action-by-action.
You can also add comparable character to other spots of your residence by adding a wood plank accent wall or wood plank wainscoting, a planked kitchen island style and design, or a plank headboard wall.
Thanks to DAP for sponsoring this article. All opinions are ours this article could have affiliate backlinks — see our comprehensive disclosure plan below.
Diy Whitewashed Wood Plank Ceiling
This ceiling truly remodeled the seem of this place in our household. We like how it turned out. We are thinking of performing this in other rooms in our household but before we do that I preferred to take a look at out how we appreciated it in this place in the basement.
We experienced currently mounted new flooring, so now that we have a new basement ceiling, we just have to do every little thing in involving! #youmightbeaRemodelaholic
See the befores of our Jordan household below and all the assignments for this household below.
Dimensions of Job:
11′ x 14′ (154 sq. ft) ceiling with aspect drop down. This place is under the main flooring of the household in the basement.
Charge and Supplies:
Community components store charges
- (four) packing containers 8′ very long Knotty Pine Wood V-Plank Boards Kits $54.01/box
- forty one rows at 11′ – 6″
- About 500′ of boards (63 boards, 3.five box kits)
- Increase 10% far more boards for midsection. 50 percent a box labored good for me.
- (1) Gal. White Latex Paint $31
- (10) 10 oz. DAP DYNAGRIP Adhesive $four/10 oz.
- (1) box 1 1/4″ Pin Nails $10/box
- Overall Cost $261
Video clip Coming Soon
Continue to be tuned for a video tutorial of this basement ceiling update. Subscribe to our YouTube channel and simply click the bell to flip on the notifications!
Whitewashing and Installation Steps
1. Whitewash Boards To start with.
This will conserve you a large amount of time and headache if you do this first. I experienced superior regulate of the color when I took the time to whitewash the boards before I mounted them.
Dilute the paint of option with water. I applied about 75% paint to twenty five% water for this seem. I did not want it to be also white so I wiped it off, with a rag, proper soon after applying the paint with a brush. Let that dry for a pair of hrs then you can begin putting in.
Relevant Reading: Use this color washing technique to stain wood any color!
two. Thoroughly clean the Surface.
Wash the ceiling with a wet rag and some dish soap to take out any dirt or dust. This will assist the boards adhere to the ceiling when you glue them in location.
You’ll also want to take out the mild fixtures to reinstall soon after your plank ceiling is mounted. We took this option to swap the flush-mount “boob lights” with can lights and we like the change! A lot more details about that coming in the video.
Read through far more about putting in recessed can lights or see our picks for far more fashionable flush-mount fixtures below.
3. Mark All the Floor Joists or Ceiling Rafters.
In my circumstance, I was in the basement beneath the main amount of the household, so I discovered all the flooring joists with a stud finder and chalked a line across the place to identify the heart of each and every flooring joist with a chalk line, so I could nail the boards to the flooring joists powering the drywall in the ceiling.
I have witnessed and investigated other procedures to putting in boards on the ceiling, but I made a decision that just nailing and gluing to the ceiling was the greatest possibility for me. Our concluded ceiling peak devoid of the new boards was 7′-6″ and I did not want to make it also a lot shorter with other procedures that I noticed.
See how other DIYers have mounted a plank ceiling in the kitchen and in the attic, and a reclaimed wood plank ceiling in a bed room.
four. Get started first row.
Get started on the longest wall in the again of the place, reverse of the doorway. I ran the boards the length of the place, perpendicular to the doorway. Cut the boards as you go with a miter noticed.
Oriented the boards so the the tongue of the boards had been experiencing the entry of the place. I preferred to make sure that from the entry of the place you could not see into the gaps of the tongue and groove of the boards.
I utilized the DAP DYNAGRIP Adhesive to the again of the board
Then applied the pin nailer to maintain it in location on the ceiling though the adhesive dries. I nailed in to the edge of the tongue at and angle, to disguise most of the nail heads. Since I applied a pin nailer most of the holes where by so modest it did not even mater also a lot that they where by displaying.
five. Offset the Finishes of the Boards
Offset the ends of the boards at the very least 4″ from the former row. You want to stay away from lining up the ends on each and every row as a lot as you can. This will give you a nicer staggered seem.
six. Repeat the Course of action Until finally the Ceiling is Concluded
Repeat putting in the tongue and groove planks until eventually you’ve included the ceiling. The impending video will involve how to evaluate and reduce all-around the holes for your lights, so be sure to subscribe to our YouTube channel to see that!
For the previous row of boards I ripped the boards to width with a table noticed centered on the remaining width I desired to finish it off. I reduce off the tongue finish of the board. You also have to take out 50 percent of the groove up in opposition to the ceiling in get to glue this piece in location.
When the previous board is mounted then you are accomplished. We remaining the ceiling with whitewashed flat sheen seem and we like it.
What do you believe? Let us know in the remarks beneath if a whitewashed knotty pine board ceiling is anything you would like in your residence. Be sure to share and pin for afterwards!
A lot more Diy ceiling updates: