Create a cubby storage toy organizer from just a single sheet of plywood! This Diy stacked toy cubby with dividers is great storage for toys, craft provides, or whichever you want to manage in a child’s space, play space, or nursery.
Our entry desk with cubby storage is a further fantastic kid-welcoming cubby storage concept. See far more Diy toy storage tips in fifty Intelligent Toy Storage Solutions and twenty five Pleasurable Toy Storage Thoughts.
Diy Cubby Storage Toy Organizer
Designed by Amanda from Sincerely Marie Designs Options by Remodelaholic
Very first featured in Amanda’s boy’s space makeover right here.
This write-up contains affiliate links. Learn far more and read our comprehensive disclosure policy right here.
We procured a toy box over a 12 months back but I immediately located that it was far more of a black gap than something else. Moreover remaining massive and darkish, my son would toss 50 percent of the toys out ahead of he located what he was hunting for. Following I had lastly had adequate, I begun hunting for toy organizers on the internet.
I located a single from Land of Nod and loved it! A person thing I did not adore was the value. $199 for a single bin . . . ouch! J and I realized we could make it on our possess for way considerably less and we did. We had been not able to find strategies for just what we required. It took us a 7 days or two to hammer out the strategies. Listed here they are!
We produced the toy bins from a single 4×8 – 3/4″ sheet of plywood. We used a independent 1/4″ sheet that we previously had for the backing. The moment place jointly, the toy cubby steps 36″ x 14 3/4″ x 32″.
How to Create a Diy Cubby Storage Toy Organizer
- 3/4″ Sheet of plywood
- 1/4″ Sheet of plywood*
- two – 1½″ Pocket gap screws
- 1¼″ Pocket gap screws
- Wooden glue
- Sand paper
- 1¼“Brad nails
- Paint/Primer or Stain of choice
Full materials buying listing and slash diagrams are included in the PDF toy cubby storage strategies right here.
Move 1: Cut Parts & Drill Pocket Holes
Cut out the cubby pieces as indicated in in the toy organizer woodworking program, including the mitered edges. Drill pocket holes as indicated in the strategies.
Move two: Assemble Person Cubbies
Applying pocket holes and wooden glue, assemble 3 cubby sections.
Move 3: Install Dividers
Evaluate and mark the divider areas, then nail in location.
Move 4: Stack and Incorporate Backing
Stack the 3 cubby sections. Cut a sheet of plywood to the correct sizing and screwed it onto the back again. This will maintain every shelf in location. To be capable to stack and unstack the cubbies, slash person backing pieces for every cubby section.
Move 5: Finishing the Cubby Storage Shelves
I selected a paint coloration named Serious Gray by Sherwin Williams. We enable it dry overnight and moved it into location the adhering to day.
Additional cubby storage you can build: